6
2.4.2
Dynamic Aggregation Configuration
Dynamic aggregation differs from static aggregation in that port quantity is fixed in static
aggregation, but quantity of actually aggregated port is adjusted dynamically according to flow rate
strategy.
Add the ports to the dynamic group.
Step 1
1)
Select
LACP (Active)
in the
Mode
area, and add the ports to the aggregation group.
For example, add port 3 and port 4 to aggregation group 2.
2)
Select
LACP (Passive)
in the
Mode
area, and add the ports to the aggregation group.
For example, add port 5 and port 6 to aggregation group 3.
Dynamic configuration
Figure 2-6
Click
OK
.
Step 2
IP and Route
2.5
You can add the IP address of VLAN virtual interface and IP route. For details, see "3.1.1.2 IP and
Route."
Click
IP & Route
on the
Quick Setting
interface.
Step 1
The
IP & Route
interface is displayed.
