5
Aggregation
2.4
Add the port to the aggregation. For details, see "3.1.4 Aggregation."
Click
Aggregation
on
Quick Setting
interface, and the
Aggregation
interface is displayed.
Aggregation
Figure 2-4
2.4.1
Static Aggregation Configuration
Static aggregation is a method of combining or bundling of multiple switch ports or NICs to form a
single etherchannel. For example, add port 1 and port 2 to Static Group 1.
Select
Model
as
Static
in group 1, which indicates that the group is static aggregation.
Step 1
Select port 1 and port 2 in group 1 to add the two ports to static aggregation.
Step 2
For 4-port PoE switch, you can configure up to 3 groups of static aggregation. Static
aggregation is different depending on different models of PoE switch. The actual interface
shall prevail.
Static configuration
Figure 2-5
Click
OK
.
Step 3
The port 1 and port 2 form a logical port.
