Dahua HD Dual Lens Dash Network Camera Quick Start Guide
8
Figure 2-2
Step 1
Tear off the membrane on one side of the mounting foam and then stick it on the surface of the
mounting bracket.
Step 2
Tear off the membrane on the other side of the mounting foam and fix the device on the needed
location.
Step 3
Adjust the device angle according to requirements after installation is completed.
2.3 Adjust Device Angle
Step 1
Loosen the fixing ring clockwise, there is cable inside the bracket, so it is unnecessary to totally
loosen the fixing ring.
Step 2
Adjust the in-vehicle lens according to the monitoring range, the lens adjustment direction is
shown in Figure 2-3.
Step 3
