Dahua DH-HCVR5424L-S2, Руководство пользователя

Страница: 181 / 340

HDCVI Standalone DVR User’s Manual
171
4.11.4 Storage
4.11.4.1 Schedule
4.11.4.1.1 Record
Note:
You need to have proper rights to implement the following operations. Please make
sure the HDDs have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type
and time in schedule interface.
In the main menu, from Setting->Storage->Schedule, you can go to schedule menu.
See Figure 4-128.
Please note you need to go to main menu->Setting->System->General->Holiday to
set holiday date first, otherwise, there is no holiday setup item.

Channel: Please select the channel number first. You can select
“
all
”
if you want to
set for the whole channels.

: Sync connection icon. Select icon of several dates, all checked items
can be edited together. Now the icon is shown as .

: Click it to delete a record type from one period.

Record Type: Please check the box to select corresponding record type. There are
five types: Regular/MD (motion detect)/Alarm/MD&Alarm/Intelligent.

Week day: There are eight options: ranges from Saturday to Sunday and all.

Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->System->General) to add holiday first. Otherwise you can not see this
item.

Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream .

Redundancy: System supports redundancy backup function. You can highlight
Redundancy button to activate this function. Please note, before enable this function,
please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager). Please note this function is null if there is only one HDD.

ANR: Check the ANR box, DVR can auto record once the network camera is offline.
You can set the record period here. Please make sure you connected camera
supports the ANR function.

Period setup: Click button after one date or a holiday, you can see an interface
shown as in Figure 4-129.There are four record types: regular, motion detection (MD),
Alarm, MD & alarm.
Please following the steps listed below to draw the period manually.

Select a channel you want to set. See Figure 4-125.