4
3.1.2 Configuring Current Time
You can view and configure the current time and time zone of the Switch.
Step 1
Select
System Config
>
System Info
>
Current Time
on the
System Info
page.
Step 2
Configure the Switch time. There are two ways to configure the time.
●
Manually configure the
Current Time
and
Time Zone
, and then click
Save
.
●
Click
Sync PC
to sync the Switch time to the computer time.
Figure 2-3 Current time
3.1.3 Viewing CPU Usage
Step 1
Select
System Config
>
System Info
>
CPU Usage
on the
System Info
page.
Step 2
View the CPU usage of the Switch.
Figure 2-4 CPU usage
3.2 Configuring Network
This section introduces the operations of viewing and configuring the IP address, subnet mask,
default gateway and MAC address of the Switch.
Background Information
DHCP (Dynamic Host Configuration Protocol) is used to dynamically allocate IP address and other
network configuration parameters for the network devices.
Procedure
Step 1
Select
System Config
>
Network Configuration
on the
System Info
page.
