16
Alarm setup
Figure 4-14
Select the alarm type to enable alarm function, and then tap
OK
.
Step 2
4.3.6
Setting Door Status
You can set the access control status to normal, NO or NC.
On the
Access
screen, select door status setup, and then tap
OK
.
Step 1
Use
↑
and
↓
to
select the access control status, and tap
OK
.
Step 2
is displayed after selection.
System Settings
4.4
4.4.1
Local Setup
You can set data, admin password and voice mail. You also can export all data, and restore default
settings.
4.4.1.1
Setting Date
Set system date and time.
On the
System
screen, tap
↑
or
↓
to select date setup, and then tap
OK
.
Step 1
Select local setup, and then tap
OK
.
Step 2
Select date setup, and then tap
OK
.
Step 3