3
2
SETUP BEFORE INSTALLATION
2.1
Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.
2.2
Open Device
Remove the package and then take out the device. See Figure 2-1.
Figure 2-1
2.3
Dial Switch Setup
2.3.1 Dial Location and Function
The corresponding functions of dial switch for analog speed dome and HDCVI speed dome are
different, which will be respectively introduced below.
2.3.1.1
Analog Speed Dome
Open the rear cover and you can see there is a dial switch on the PTZ mainboard which you can
use to set the speed dome address, baud rate and parity etc. See Figure 2-2.
