Dahua Technology WizMind IPC-PDBW82041-B360, Руководство по эксплуатации

Страница: 51 / 154

Operation Manual
42
Mailbox
SMTP
server
Authentication Port Description
none 25
● You need to enable SMTP
service in your mailbox.
● The authentication code is
required; the email
password is not applicable.
Authentication code: the code
you receive when enabling
SMTP service.
Sina
smtp.sina.co
m
SSL 465
Enable SMTP service in your
mailbox.
none 25
126
smtp.126.co
m
none 25
Enable SMTP service in your
mailbox.
Step 4 Click Apply .
6.3.6 UPnP
UPnP (Universal Plug and Play), is a protocol that establishes mapping relation between local
area and wide area networks. This function enables you to visit local area device through wide
area IP address.
Prerequisites
● Make sure the UPnP service is installed in the system.
● Log in the router, and configure WAN IP address to set up internet connection.
● Enable UPnP in the router.
● Connect your device to the LAN port of the router.
● Select
>
Network
>
TCP/IP
, in
IP Address
, enter the local area IP address of the
router or select DHCP and acquires IP address automatically.
Procedure
Step 1 Select > Network > UPnP .