Dahua Technology Ultra Series, Руководство пользователя, Страница: 18 / 28

User's Manual
12
example.
Procedure
Step 1 Press Menu on the remote control.
Step 2 Press or on the remote control to go to the Geometry page.
Step 3 Press or to select Auto Adjust , and then press Enter to start auto adjustment.
Step 4 (Optional) Press or to adjust the value of
H Position
,
V Position
,
Clock
, or
Phase
.
4.3 PIP
Background Information
PIP (picture-in-picture) allows you to set how many split windows can be displayed on the screen.
Press Menu on the remote control and then press or to go to the
PIP page.
Figure 4-4 PIP
Table 4-4 PIP parameters description
Parameter Description
Mode
You can select PIP modes from 1P (1 window), 2P TB (2 horizontal split
windows), 2P PIP (1 smaller window inside 1 bigger window), 4P (4 split
windows), and PIP (2 vertical split windows).
PIP Position
You can adjust PIP position only in PIP mode. PIP positions available: Centre ,
Top L (upper left), Top R (upper right), Button L (lower left), and Button R
(lower right).
PIP Size
You can set PIP size only in
PIP
mode. The size value ranges from 1 to 10. The
larger the value, the larger the size.
Input Swap
You can switch the input source of each window in 2P TB , 2P PIP , 4P , and PIP
modes.
Select Region Select the region that you want to adjust picture settings.