Dahua Technology NVR2104/2108HS-W-4KS2 1U Скачать руководство пользователя

Страница: 284 / 363

Table of Contents 272

Parameter

Description

This setting is available only when the

Multi-address

is selected in the

Net Mode

list.

IP Version

In the

IP Version

list, you can select

IPv4

IPv6

. Both versions are

supported for access.

MAC Address

Displays the MAC address of the Device.

DHCP

Enable the DHCP function. The IP address, subnet mask and default

gateway are not available for configuration once DHCP is enabled.



If DHCP is effective, the obtained information will display in the

Address

box,

Subnet Mask

box and

Default Gateway

box. If not,

all values show 0.0.0.0.



If you want manually configure the IP information, disable the

DHCP function first.



If PPPoE connection is successful, the IP address, subnet mask,

default gateway, and DHCP are not available for configuration.

IP Address

Enter the IP address and configure the corresponding subnet mask and

default gateway.

IP address and default gateway must be in the same network segment.

Subnet Mask

Default Gateway

DNS DHCP

Enable the DHCP function to get the DNS address from router.

Preferred DNS

In the

Preferred DNS

box, enter the IP address of DNS.

Alternate DNS

In the

Alternate DNS

box, enter the IP address of alternate DNS.

MTU

In the

MTU

box, enter a value for network card. The value ranges from

1280 byte through 1500 byte. The default is 1500.

The suggested MTU values are as below.



1500: The biggest value of Ethernet information package. This

value is typically selected if there is no PPPoE or VPN connection,

and it is also the default value of some routers, network adapters

and switches.



1492: Optimized value for PPPoE.



1468: Optimized value for DHCP.



1450: Optimized value for VPN.

Test

Click

Test

to test if the entered IP address and gateway are

interworking.

4.12.2

Port

You can configure the maximum connection accessing the Device from Client such as WEB,

Platform, and Mobile Phone and configure each port settings.

Step 1 Select

Main Menu > NETWORK > PORT

The

PORT

interface is displayed. See Figure 4-203.

Содержание NVR2104/2108HS-W-4KS2 1U












































































































































































































































































































































































Результаты поиска

Содержание NVR2104/2108HS-W-4KS2 1U

Отзывы:

Похожие инструкции для NVR2104/2108HS-W-4KS2 1U

Бренды по названию

Популярные бренды

Dahua Technology NVR2104/2108HS-W-4KS2 1U, Руководство пользователя

Результаты поиска

Содержание NVR2104/2108HS-W-4KS2 1U

Отзывы:

Похожие инструкции для NVR2104/2108HS-W-4KS2 1U

Бренды по названию

Популярные бренды