Dahua Technology IVSS Series, Руководство пользователя, Страница: 73 / 376

User's Manual
53
Parameters Description
Port
Enter the port number of the remote device.
When the Manufacturer is Private, you need to configure this parameter.
Remote CH No.
Select the channel number for the remote device.
1. Select a link type.
2. To get the total number of channels, click Connect.
3. Enter the range of channels you need, and then click Selected.
4. Click OK.
Step 5 Select the remote device and then click Add.
●
If system fails to add the remote device, see the reason on the Status column to change
the remote device information and then click Retry to try to add again.
●
If a remote device is in exception due to network disconnection other reasons, it can
also be added. It comes online after the exception is resolved.
Figure 5-20 Confirm
Step 6 Click Continue to add or Finish.
●
Click Continue to add, device goes back to Smart add page to add more remote
device.
●
Click Finish to complete adding remote device process. Device displays Device page to
view the newly added remote device information.
5.4.2.3 RTSP
Step 1 Click , and then select DEVICE.