Construction Guide
17
Adding Camera
On the home page, select
Setting
>
Add Camera
>
Add Camera
.
Select and then enable the channel, enter the IP address, username and
password, and then click
Save
.
You can click
Refresh
after several seconds to check if the camera is
successfully added to the edge storage device. If it is, the camera icon will turn
orange.
Configuring Recording and Capturing
Configure recording
On the home page, select
Setting
>
Storage
>
Record
>
Record Control
.
Select a channel, select
Main Stream
as the
Record Mode
, and then click
Save
.
