Quick Start Guide
3
●
If you select the
Current Segment Search
checkbox and the
Other Segment Search
checkbox together, the system searches for devices under both conditions.
●
Enter username and the password when you want to change IP, configure the system,
update the device, restart the device, and more.
Step 5
Click
OK
.
Step 6
Select one or several devices in uninitialized status, and then click
Initialize
.
Step 7
Select the devices to be initialized, and then click
Initialize
.
●
If you do not provide the linked information for password reset, you can reset the
password only through XML file.
●
When initializing multiple devices, ConfigTool initializes all devices based on the
password reset mode of the first selected device.
Figure 2-2 Password setting
Step 8
Set and confirm the password of the devices, enter a valid email address, and then click
Next
.