Dahua Technology IPC-HFW1239TL1-A-IL, Быстрый старт, Страница: 11 / 17

If initialization failed, click to see more information.
Step 4 Click Finish.
3.2 Changing the Device IP Address
Background Information
●
You can change the IP address of one or more devices at a time. This section is based on
changing IP addresses in batches.
●
Changing IP addresses in batches is available only when the corresponding devices have the
same login password.
Procedure
Step 1 Search for the device whose IP address needs to be changed through ConfigTool.
a. Double-click ConfigTool.exe to open the tool.
b. Click Modify IP.
c. Select the searching way, enter the username and password, and then click OK.
The username is admin, and the password should be the one that you set while
initializing the device.
Step 2 Select the devices whose IP addresses need to be changed, and then click Modify IP.
Step 3 Configure IP address.
●
Static mode: Enter Start IP, Subnet Mask, and Gateway, and then the IP addresses of
the devices will be modified successively starting from the first IP entered.
●
DHCP mode: When the DHCP server is available in the network, the IP addresses of
devices will be automatically obtained through the DHCP server.
The same IP address will be set for multiple devices if you select the Same IP checkbox.
Step 4 Click OK.
3.3 Logging in to the Webpage
Procedure
Step 1 Open the IE browser, enter the IP address of the device in the address bar, and then press
the Enter key.
If the setup wizard opens, follow the on-screen instructions to complete it.
Step 2 Enter the username and password in the login box, and then click Login.
Step 3 (Optional) For first-time login, click Click Here to Download Plugin, and then install the
plugin as instructed.
The home page opens when installation is complete.
Quick Start Guide
4