Dahua Technology IPC-HDW5842T-ZE, Руководство по эксплуатации

Страница: 447 / 473

Operation Manual
199
Figure 12-14 Face report
Step 4 Click the picture, and then you can view the details.
12.3 Auto Upload
Select the upload mode, enable it, and configure the parameters. The camera will upload reports of
AI functions to a defined server periodically.
Background Information
There are three upload methods:
●
HTTP: Upload reports to a server through HTTP protocol.
●
FTP: Upload reports to a server through FTP protocol. You need to set the parameters, such as the
server IP, username, password, and storage path.
●
Email: Send reports to receivers through emails. You need to set the parameters, such as the
username, password, sender and receiver.
Procedure
Step 1 Select Report > Auto Upload .
Step 2 Select the upload method, and then enable it.
Step 3 Set parameters.
Parameters of different upload methods are different.
●
HTTP
Click Add , and then add the information of server. You can add two server information
at most.