Dahua Technology IPC-HDW5842T-ZE, Руководство по эксплуатации

Страница: 378 / 473

Operation Manual
130
Parameter Description
Parking Upper Limit
Repeat Alarm Time
When the alarm is triggered and this state
lasts for repetitive alarm time, the alarm
will be triggered again.
0 means Repeat Alarm function
disabled.
Upper Limit Vehicle
Quantity Alarm
Enable upper limit vehicle quantity alarm
to set the upper threshold and duration of
vehicles in the area. When the number of
vehicles exceeds the threshold and the
congestion time exceeds the configured
continuous congestion time, an alarm will
be triggered. The upper threshold of
vehicles that trigger an alarm is 20
vehicles by default.
Step 6 Select time plan and click + Event Linkage .
●
If the added time plan cannot meet your requirements, click Add Schedule to add an
arming schedule. For details, see "6.5.1.2.1 Adding Schedule".
●
Click Event Linkage to add linked event and set linkage parameters. For details, see
"6.5.1.2 Alarm Linkage".
Step 7 Click
Apply
.
8.6 Setting Parking Space
This section introduces rule configuration and global configuration for parking space.
8.6.1 Rule Configuration
8.6.1.1 For Parking Space Detection Fisheye WizMind Network Camera
Procedure
Step 1 Select AI > Smart Plan .
Step 2 Click next to Parking Space Management , and then click Next .
Step 3 Select the mode.
●
12 parking spaces: Only supports parking space detection.
●
6 parking spaces: Supports both ANPR and parking space detection.
ANPR is available for customized devices.
Step 4 Draw rules.
●
Manual drawing: Click Draw Rule on the lower-right corner of the image. Click the left
mouse button on the image to draw a closed box, and then click the right mouse
button to complete the drawing.