Quick Start Guide
4
Click Finish.
Changing the Device IP Address
You can change IP address of one or multiple devices in one time. This section is based on
changing IP addresses in batches.
Changing IP addresses in batches is available only when the corresponding devices have the
same login password.
Search for the device whose IP address needs to be changed through ConfigTool.
1)
Double-click
ConfigTool.exe
to open the tool.
2)
Click
Modify IP
.
3)
Select the searching way, enter the username and password, and then click
OK
.
The username is
admin
, and the password should be the one you set while initializing
the device.
Select the devices whose IP addresses need to be changed, and then click
Modify IP
.
Configure IP address.
Static
mode: When you select
Static
, you need to enter
Start IP
,
Subnet Mask
, and
Gateway
. The IP addresses of the devices will be modified successively starting from the
first IP entered.
DHCP
mode: If the DHCP server is available on the network, when you select
DHCP
, the
IP address of devices will be automatically obtained through the DHCP server.
The same IP address will be set for multiple devices if you select the
Same IP
checkbox.
Click
OK.
Logging in to the Webpage
Open IE browser, enter the IP address of the device in the address bar, and then press the Enter
key.
If the setup wizard is displayed, finish the settings as instructed.
Enter the username and password in the login box, and then click
Login
.
For the first-time login, click
Click Here to Download Plugin
, and then install the plugin as
instructed.
The home page is displayed when the installation is finished.
