background image

Quick Start Guide 

Foreword 

General 

This manual introduces the functions, configuration, general operation, and system maintenance of 
network camera. 

Safety Instructions 

The following categorized signal words with defined meaning might appear in the manual. 

Signal Words 

Meaning 

 

Indicates a medium or low potential hazard which, if not 

avoided, could result in slight or moderate injury. 

 

Indicates a potential risk which, if not avoided, could result 
in property damage, data loss, lower performance, or 

unpredictable result. 

 

Provides additional information as a supplement to the 

text. 

Revision History 

Version 

Revision Content 

Release Date 

V1.0.3 

Updated SD card installation. 

November 2021 

V1.0.2 

Updated "Important Safeguards and 

Warnings" 

April 2021 

V1.0.1 

Modify the pictures in "3.3.3 Attaching 

Camera". 

September 2020 

V1.0.0 

First release. 

May 2020 

Privacy Protection Notice 

As the device user or data controller, you might collect the personal data of others such as their face, 
fingerprints, and license plate number. You need to be in compliance with your local privacy 
protection laws and regulations to protect the legitimate rights and interests of other people by 
implementing measures which include but are not limited: Providing clear and visible identification 
to inform people of the existence of the surveillance area and provide required contact information. 

About the Manual 

  The manual is for reference only. Slight differences might be found between the manual and the 

product. 

  We are not liable for losses incurred due to operating of the product in ways that are not in 

compliance with the manual. 

  The manual will be updated according to the latest laws and regulations of related jurisdictions. 

For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit 
our official website. The manual is for reference only. Slight differences might be found between 

Содержание Eyeball




















Отзывы: