Quick Start Guide
4
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
●
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
●
Device initialization is available only when the camera (whose IP address is 192.168.1.108 by
default) and the PC stays on the same network segment.
●
Plan usable network segment properly to connect the device to the network.
●
The following figures and interfaces are for reference only.
2.1 Initializing Device
Step 1
Double-click ConfigTool.exe to open the tool.
Step 2
Click
.
Step 3
Click
Search Setting
.
Figure 2-1 Setting
Step 4
Select the searching way.
●
Current Segment Search (default)
Select the
Current Segment Search
checkbox. Enter the username in the
Username
box and the password in the
Password
box. The system will search devices
accordingly.
●
Other Segment Search
Select the
Other Segment Search
checkbox. Enter IP address in the
Start IP
box and
End IP
box respectively. Enter user name and password. The system will search for the
devices accordingly.
●
If you select the
Current Segment Search
checkbox and the
Other Segment Search
checkbox together, the system searches for devices under both conditions.
