Dahua Technology DHI-LM55-F400, Руководство пользователя

Страница: 4 / 41

User’s Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Operation Requirements

This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this
equipment may cause radio interference.

Make sure that the power supply of the device works properly before use.

Do not pull out the power cable of the device while it is powered on.

Only use the device within the rated power range.

Transport, use and store the device under allowed humidity and temperature conditions.

Prevent liquids from splashing or dripping on the device. Make sure that there are no objects filled
with liquid on top of the device to avoid liquids flowing into it.

Do not disassemble the device.

Do not use the product near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.

Do not place the product on an unstable cart, stand, or table. If the product falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the product.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the product and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place the product on a bed, sofa, rug, or similar surface. Do not
place the product near or over a radiator or heat register. Do not place the product in a bookcase
or cabinet unless proper ventilation is provided.

The product should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.

Unplug the unit during a lightening storm or when it will not be used for long period of time. This
will protect the product from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the product cabinet. It could short circuit parts causing a
fire or electric shock. Never spill liquids on the product.

Do not attempt to service the product by yourself; opening or removing covers can expose you to
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the product only with UL listed computers which have
appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

Only suitable for the power adapter included.