Dahua Technology DH-XVR1B04 Скачать руководство пользователя страница 169

Страница: 169 / 363

User’s Manual

157

Locking and Unlocking the Recorded Video



To lock the recorded video, on the File List interface, select the check box of the recorded video,

and then click

. The locked video will not be covered.



To view the locked information, click

, the File Lock interface is displayed.

The recorded video that is under writing or overwriting cannot be locked.



To unlock the recorded video, in the File Lock interface, select the video, and then click Unlock.

File lock

Alarm Events Settings

5.10.1

Alarm Information

You can search, view and back up the alarm information.

Select Main Menu > ALARM > Alarm Info.

Содержание DH-XVR1B04












































































































































































































































































































































































Результаты поиска

Содержание DH-XVR1B04

Отзывы:

Dahua Technology DH-XVR1B04, Руководство пользователя, Страница: 169 / 363

Результаты поиска

Содержание DH-XVR1B04

Отзывы: