Dahua Technology D-TPC-BF1241-B3F4-DW-S2, Руководство по работе в сети

Страница: 123 / 158

114
Figure 6-36 802.1x
Table 6-21 Parameters of 802.1x
Parameter Description
Authentication PEAP (protected EAP protocol).
Username The username that was authenticated on the server.
Password Password of your username.
Step 4 Click Save .
6.2.12 Configuring QoS
You can solve problems such as network delay and congestion with this function. It helps to assure
bandwidth, reduce transmission delay, packet loss rate, and delay jitter to improve experience.
0–63 means 64 degrees of priority; 0 for the lowest and 63 the highest.
Step 1
Select Setting > Network > QoS .
Step 2 Set QoS parameters.
Figure 6-37 QoS
Table 6-22 QoS parameter description
Parameters Description
Real-time Monitor
Configure the priority of the data packets that used for network
surveillance. 0 for the lowest and 63 the highest.
Command
Configure the priority of the data packets that used for configure
or checking.
Step 3 Click Save .