Quick Start Guide
7
Figure 2-4 Modify IP address
Step 3
Select
Static
mode, and then enter start IP, subnet mask, and gateway.
●
IP addresses of multiple devices will be set to the same if you select the
Same IP
checkbox.
●
If DHCP server is available in the network, devices will automatically obtain IP addresses
from DHCP server when you select
DHCP
.
Step 4
Click
OK
.
2.3 Logging in to Web Interface
Step 1
Open IE browser, enter the IP address of the device in the address bar, and then press Enter
key.
If the setup wizard is displayed, finish the settings as instructed.
Step 2
Enter the username and password in the login box, and then click
Login
.
Step 3
For the first-time login, click
Click Here to Download Plugin
, and then install the plugin as
instructed.
The main interface is displayed when the installation is finished.
