11
4.1 Preparing the Camera
The Network PTZ camera comes with the PFB300S Wall Mount and the PFA110 Mount Adapter, the
installer must supply the following hardware:
•
Four (4) bolts, washers or other fastening hardware to secure the wall mount to the installation
medium. The hardware must be capable of supporting eight (8) times the weight of the camera
and mount.
•
Appropriate tools to mount the camera to the wall.
Unpacking the Camera
1. Remove the camera, the mount accessories and any hardware packages from the boxes.
2. Remove the camera from the plastic wrapping and place the camera dome-end up in the foam
packaging.
3. Remove the bubble and then remove the packing material (EPE) that protects the dome’s drive
mechanism.
4. Replace the bubble.
Figure 4-2
