DAHAO 41 Series, Руководство пользователя, Страница: 237 / 268

2.11.1 Parameters of Letter Sewing
A D B E C F
J
K
I
H
G
Functions
：
No. Functions Content
A Figure Input Input figures. At most, 20 figures can be inputted
B Font Selection 28 fonts are available
。
C Array Method User can select “Horizontal”, “Vertical”, “Upper Arc” “Down Arc”
D Letter Pitch Set the interval between letters
E Density of Satin Set the satin density. The larger value means the denser satin stitches
F Scaling in Height Scale the height of letter, range: 50~200.
G Scaling in Width Scale the width of letter, range: 50~200.
H
Rotation/Follow
(Not Follow)
When the array method is linear (vertical or horizontal), the content on the button will
be displayed as “Rotation”, which is to set the rotation angle of letter
；
When the array method is arc (Upper Arc or Down Arc), this button will display
“Follow” or “Not Follow”, which is to set whether the letter rotates with the arc.
I Trim/Not Trim Set whether to automatically insert thread-trimming code
J Return Quit and return to main interface
K Enter Confirm operations. And then enter pattern adjustment interface.