DAF DAVIE XDc II, Руководство пользователя, Страница: 57 / 126

©
200706 6-11
Direct Testing
DAVIE XDc II
6.5.6 ECU Installation Variants
This option within the "Go To" menu on the Navigation Bar allows the user to
return to the screen which list the ECU options found for the vehicle.
6.5.7 Direct Test Selection Screen
Use this function in the "Go To" menu to switch back to the "Direct Test
Selection" and to select another system. The diagnostic session will be not
completed and all previous test results will be available until the "Direct Test"
function is terminated by using the "Exit" function.
6.6 Use of illustrations
During testing, various documents can be displayed, such as drawings for
connectors, wiring diagrams or even instruction sheets.
These documents are "linked" to the system at relevant points during testing.
For example, if a test is being performed on a connector, a schematic of this
connector, showing the various pin connections, could be viewed.
Figure 6-12 Selection of block diagram button in "Direct Test"
By pressing the corresponding button, "Adobe Acrobat©" will start up separate
of the DAVIE XDc II program. An index page could appear before the
illustrations are displayed.