DAF DAVIE XDc II Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 126

DAF DAVIE XDc II Скачать руководство пользователя страница 56

6-10

©

200706

DAVIE XDc II

Direct Testing

6.5.5

Test Plan

The test plan shows the list of the test procedures that have been executed.

The option "Test plan" is available during a diagnostic session. This plan is
organized by the DAVIE XDc II to provide useful information guiding the user to
a correct diagnosis as quickly as possible. The "Test plan" and the results will
be saved into the log file.

An example of a test plan shows the listing of the tests that have been executed.

Figure 6-11 Test plan

The user can select which part of the plan to execute next by pressing a
particular test, which will then be performed when the "Forward / >" button is
pressed.

The result of the test procedure is noted in front of the line. The following results
are possible:

1.

OK

The test procedure was completed with the result OK.

2.

X

The test procedure was completed with the result Not OK.

3.

?

The result of the test procedure is unknown or the procedure was
interrupted. For example the test was closed by using the back button.

«
...
54
55
56
57
58
...
»

Содержание DAVIE XDc II































































































































Отзывы:

Нет отзывов