DESCRIPTION AND USING
2
DUST METER
How to check the DUST METER!
Operate the cleaner with MAX power and keep the wide suction
brush apart from the floor.
• If the red indicator of the DUST METER appears,
– Empty or change the dust bag.
– In case the hose is blocked with a large object, remove it.
• When cleaning with the crevice tool or the dusting brush, the
red indicator may appear. In this case, continue cleaning.
Button
WIDE SUCTION BRUSH
• Change the position of the
button according to the
surface to be cleaned.
POWE
• Connect to
as shown o
• To plug or u
plug itself. D
pull on the
Hole
Hook
HOSE HANDLE
Trouble shooting
■
Before Askig for Service, please check each item below first if you have any trouble with your cleaner.
Problem
Check Point
Measure
Suction power is
weak
The cleaner does not
work
Power cord will not
rewind
• Dust bag
• Pipe or hose
• Power control switch
• Power cord
• Suction power
• When the dust bag is full or blocked
or any of the accessories are
blocked, the over-heating protection
for the motor is activated.
• Power cord
If the dust bag is full of dust, empty it or change it for a new one.
If clogged or blocked, remove obstructing object.
Make sure to set the power control switch to the curtain
position.
Check if power cord is plugged in.
Check if hose is attached firmly into the suction hole.
Switch off and unplug the cleaner and check the dust bag
and accessoires and remove and blockage. The cleaner can
be switched on again after about 20 minutes.
Pull the power cord out a little and press the cord rewind
button.