•
Pressing the spring down with a
special tool, assemble by inserting the
valve cotter.
•
After the valve is assembled, inspect
the valve tapping it lightly with an
urethane hammer if accurate
assembling was done.
9.2.4. Rocker Arm
1) Rocker arm disassembling
•
Remove the snap rings in both ends
of rocker arm with a pair of pliers.
•
Tear down washer, rocker arm.
•
Disassemble the rocker arm bush by
means of a press.
3) Inspection and Measurement
a) Rocker arm bracket
(Single unit type with a shaft)
Measure the outer diameter of rocker
arm bracket with outside micrometer
at the position that the rocker arm is
installed, and in case that it exceeds
the limit value, replace.
B) Rocker arm
Inspect the rocker arm surface that
contacts with the valve stem for any
scratch, step wear and correct the
minor degree of wear with an oil stone
or the fine grinding paper and replace if
they are severe.
- 81 -
EFM2040I
EFM2091I
Standard
Limit
Bush Inner Dia.
25.005~ 25.035 mm
25.055 mm
Shaft outer Dia.
24.967 ~ 24.990 mm
24.837 mm
Clearance
0.015 ~ 0.068 mm
0.25 mm
EA6M2003
Diameter
