21
2-2. Rinse Cycle
1) Drainage
1
If the water is 55°C or hotter, cold water is added to lower the water temperature. When the water
temperature decreases to 50°C or lower, water drainage resumes.
2
After the water drainage starts, the drain pump continues to work.
3
If the water level lowers to the reset level within 60 seconds, the waiting time of 20 seconds applies.
Otherwise, the waiting time of 40 seconds applies.
2) Intermediate Spin
1
Intermediate spin is run at the pre-determined speed for each program.
3) Water Supply
1
Only cold water is supplied to the rinse cycle.
2
Fabric softener is added to the final rinse cycle.
4) Resupply of Water
1
The water level is measured a minute after the rinse cycle starts to determine whether water needs to be
added to raise the water level to the preset level.
2-3.Spin Cycle
1) Drainage
1
It is equivalent to the drainage cycle for rinsing.
2-3.Spin Cycle
1) Termination of Door Lock
1
After the electric signal to door lock is cut off, the door is shaken horizontally until it becomes mechanically
openable.
MINI 1.0: D-CV701*, WFWM11*
MINI 1.5: ODW30-999B, ODW30-999G, DWM30-999PG, WFWM12*
Category
Program
RPM
Normal
700
Delicate
400
Baby Care
700
Night Time
500
QUICK15
700
INTENSIVE(40,60)
700
Category
Program
RPM
Normal
700
Delicate
400
Baby Care
700
Speed up
700
Tub Clean
700
Содержание MINI Series
