18
17
Something not working
Use Process
●
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
check listed below.
●
During machine operation it is possible that the Start/Hold pilot light flashes to indicate that the
machine is not working. Once the problem has been eliminated, press the Start/Hold button to
restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Malfunction
Possible cause
Solution
Dryer does
not work
●
Mains plug is not plugged in.
●
Loading door is open.
●
Have you pressed the Button?
●
Water receiver is full.
●
Plug in at mains socket.
●
Close loading door.
●
Press the button again.
●
Empty water receiver
Drying results
unsatisfactory
●
Wrong programme selected.
●
Filter clogged.
●
Incorrect volume of laundry.
●
Sediment on humidity sensor
●
Select a different programme the
next time you dry (see "Drying
porgrammes" section).
●
Clean lint filter.
●
Observe recommended loading
volumes.
●
Clean humidity sensor surface
Drum light does
not work (option
on some models)
●
Light bulb is defective.
●
Replace light bulb.
Drying cycle
ends shortly
after programme
starts. "End"
light illuminated.
●
Not enough washing loaded or
washing loaded is too dry for select-
ed programme.
●
Select higher drying level
(e.g. Heavy instead of Strong.)
Drying cycle lasts
an unusually
long time.
●
Load volume is too big.
●
Reduce load volume.
Something not working
If you are unable to identify or solve the problem, contact our service centre. Before tel-
ephoning, make a note of the model, serial number and purchase date of your machine:
the Sevice Centre will require this information.
Call : 011 89 252577
건조기_DWRCB8011(영).indd 20
2014-05-13 오후 5:10:24
