13
HOW TO CLEAN THE FILTER
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the drain filter
• This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..
• If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be
caused.
CAUTION : Be careful when draining if the water is hot.
Cleaning the detergent case
• In case of residual detergents or fabric softeners have accumulated ;
- it should be cleaned with a jet of running water.
- If necessary, it can be removed completely from the washing machine.
• Detergents can be also accumulate the inside cavity.
In this case, the inside cavity should be cleaned with a brush.
• After cleaning, replace the detergent case and run Rinse cycle without laundry.
1
Turn off the water
tap.
2
Separate the inlet
hose.
3
Pull out the inlet filter.
Clean the inlet filter
with the brush
4
Connect the inlet
hose
1. Open the cover-pump(
1
)
by using coin.
Separate the cover-pump(
1
)
from the washing machine.
2. Install the cover-pump(
1
) to the
lower frame(
2
).
Open the pump-filter(
3
) slowly
and allow the remaining water to
flow into a suitable container.
3. Remove foreign objects
from the pump-filter(
3
) and
clean the interior.
Close the pump-filter(
3
) and
replace the cover-pump(
1
).
1
2
1
3
1
3
1
Pull-out
2
Push and pull again
Push point
