16
MAINTENANCE
■
Cleaning the water inlet filter
• "
IE
" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.
■
Cleaning the drain pump filter
• The drain filter collects threads and small objects left in the laundry.
• Check regularly that the filter is clean to ensure smooth running of your machine.
CAUTION
Be careful when draining if the water is hot.
1. Turn off the
water tap.
2. Unscrew the
water inlet
hose.
3. Clean the filter
using a had
bristle brush.
4. Tighten up the
inlet hose.
1. Open the lower cover(
1
) by
using a coin. Turn the cap
hose(
2
) to pull out the hose.
Pull out the hose maximally.
(About 13~14cm.)
2. Unplug the cap hose(
2
), allowing
the water to flow out. At this time use
a vessel to prevent water flowing on
to the floor. When water does not
flow any more, turn the pump
filter(
3
) open to the left.
3. Remove any foreign material
from the pump filter(
3
). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(
2
) to the original place.
Close the lower cover.
1
100
2
3
about
13~14cm
2
3
about
13~14cm
■
Cleaning the water inlet filter
• "
IE
" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.
Содержание DWD-G1282SC
Страница 20: ...34 EXPLODE VIEW AND PARTS LIST TUB ASS Y ...
Страница 22: ...36 EXPLODE VIEW AND PARTS LIST CABINET AS E21 E22 ...
Страница 36: ...10 WIRING DIAGRAM 66 WIRING DIAGRAM ...