Manufactured under license of
Daewoo International Corporation, Korea
www.daewoopowerproducts.com
USER'S MANUAL
DLM
4040
Li
Lithium Lawnmower
6. ADJUSTMENT OF CUTTING HEIGHT
Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust height.
The height (the blade to the ground) can be adjusted from 25mm (position 1) to 75mm (position 5), 5
height positions.
WARNING: Make this adjustment only when the blade is stopped.
7. SAFETY PRECAUTIONS
a) Always operate with the deflector or grass catcher in the correct position.
b) Always stop the motor before removing the grass catcher or adjusting the height of cutting posi-
tion.
c) Before mowing, remove all foreign objects from the lawn which may be thrown by the machine.
While mowing, stay alert for any foreign objects which may have been missed.
（
Fig.8A
）
d) Never lift the rear of the mower while starting the motor or during normal operation.
（
Fig.8B
）
e) Never place your hands or feet underneath the under pan or into the rear discharge chute while
the motor is running. (Fig.8C).
Mowing leaves. The mowing of leaves can also be beneficial to your lawn. When mowing leaves
make sure they are dry and are not laying too thick on the lawn. Do not wait for all the leaves to be
off the trees before you mow.
WARNING: if you strike a foreign object, stop the motor. Switch off the On-off button, thorou-
ghly inspect the mower for any damage and repair the damage before restarting and operating the
mower. Extensive vibration of the mower during operation is an indication of damage. The unit
should be promptly inspected and repaired.
9. BLADE
The blade is made of pressed steel. It will be necessary to reshape it frequently(with a grind wheel).
Ensure that it is always balanced (an unbalanced blade will cause dangerous vibrations). To check
for balance, insert a round rod through the central hole and support the blade horizontally. A balan-
ce blade will remain horizontal. If the blade is not balanced the heavy end will rotate downwards.
Reshape the heavy end until the blade is currently balanced. To remove the blade (1), unscrew the
blade screw (2).and replace any parts, which are damaged. When reassembling, make sure that the
cutting edges face in the direction of the motor rotation. The blade screw (2) must be torque to
20N.m. (Fig.11).
WARNING:
For service, replace the blade with DAYE blade : DAYE 263003647
WARNING:
Remove the battery from the machine.
WARNING:
Protect hands by using heavy gloves or a rag to grasp the cutting blades when
replace the blade.
10. MAINTENANCE AND CARE
WARNING:
Before performing any maintenance or cleaning work, Always remove battery
and pull out On-off button!
Do not spray the unit with water. Ingress of water may destroy the switch and the electric motor.
Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, must contact to customer
service centre:
CAUTION:
The blade starts turning as soon as the motor is started.
WARNING!
Cutting elements continue to rotate after the motor is switched off.
CAUTION:
your mower is designed to cut normal residential grass of a height no more than
250mm.
Do not attempt to mow through unusually tall dry or wet grass (e.g. pasture) or piles of dry leaves.
9.2 LED
Please refer to the following table for the meaning of LED display. (Fig.10).
9.3 For the best results when mowing
Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign objects
which could be accidentally thrown out by the mower in any direction and cause serious personal
injury to the operator and others as well as damage to property and surrounding objects. Do not cut
wet grass. For effective mowing do not cut wet grass because it tends to stick to the underside of
the deck preventing proper mowing of the grass clippings. Cut no more than 1/3 the length of the
grass. The recommended cut for mowing is 1/3 the length of the grass. Ground speed will need to
be adjusted so the clippings can be dispersed evenly into the lawn. For especially heavy cutting in
thick grass it may be necessary to use one of the slowest speeds in order to get a clean well mowed
cut. When mowing long grass you may have to cut the lawn in two passes, lowering the blade ano-
ther 1/3 of the length for the second cut and perhaps cutting in a different pattern than was used the
first time. Overlapping the cut a little on each pass will also help to clean up any stray clippings left
on the lawn. The mower should always be operated at full throttle to get the best cut and allow it to
do the most effective job of mowing. Clean underside of deck. Be certain to clean the underside of
the cutting deck after each use to avoid a build-up of grass, which would prevent proper mulching.
8. OPERATING INSTRUCTIONS
9.1. Starting
Insert the On-off button (Fig.9A).
Start the motor as follows:
1.Press the On-off button. (Fig.9B).
2.And meanwhile, grasp the brake control handle, and keep it in grasp. (Fig.9C) ,after the motor is
running,then release the On-off button(Fig.9D), If you release the brake control handle, the motor
will stop.
KNOW YOUR LAWN MOWER
Read this manual carefully, observing the recommended safety instructions before, during and after
using your lawn mower. Following these simple instructions will also maintain your lawn mower in
good working order. Familiarize yourself with the controls on your mower before attempting to
operate it, but above all, be sure you know how to stop your mower in an emergency. Retain this
user manual and all other literature with your mower for future reference.
1. SYMBOLS MARKED ON THE PRODUCT
Read this instruction book carefully before using the lawn mower and keep it in a safe
place for future reference.
Keep bystanders away.
Beware of sharp blades. Blades continue to rotate after the motor is switched off.
Switch off isolator key before adjusting, cleaning and before leaving the product
unattended for any period.
The charger is intended for indoor use only.
Wear hearing and eye protection
The machine is protected against ingress of water drop from vertical direction.
Do not expose to rain or damp conditions.
Do not operate on inclines greater than 15°.Mow across the face of slopes,
never up and down.
Electric shock hazard.
Wait until all machine components have completely stopped before touching them.
CE
Marking
The product meets demands and regulations set by the European Community.
WEEE
Marking
CAUTION! Unusable power tools do not belong with domestic waste.
They must be taken to a communal collecting point for environmentally
friendly disposal in accordance with local regulations.
Accumulator Disposal:
Old Accumulators and batteries must not be added to household waste, but should be disposed of
in accordance with the applicable legislation.
Take unusable rechargeable batteries to the dealer’s or community’s battery collection point.
Disposing of the packaging:
The packaging is made of cardboard and separately labeled foil which is also recyclable.
Take these materials to a recycling centre.
Disposing of the packaging:
The packaging is made of cardboard and separately labeled foil which is also recyclable.
- Take these materials to a recycling centre.
Battery packs/batteries:
Li-lon
Do not dispose of batteries into household waste, water or fire. Battery packs/batteries must be
collected, recycled or disposed of in an environmentally - friendly way.
Only for EC countries:
Defective or dead batteries must be recycled according to the directive 2006/66/EC
SAFETY ALERT SYMBOL:
Indicates caution or warning may be used in conjunction with other
symbols or pictures.
2. GENERAL SAFETY RULES
The purpose of the safety rules is to attract your attention to possible dangers. The safety symbols
and the explanations with them, require your careful attention and understanding. The safety war-
nings do not by themselves eliminate any danger. The instruction or warnings they give are not
substitutes for proper accident prevention measures.
WARNING:
Failure to obey a safety warning can result in serious injury to yourself or to
others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal
injury. Save owners manual and review frequently for continuing safe operation and instructing
others who may use this tool.
WARNING:
This machine produces an electromagnetic field during operation. This field may
under some circumstances interfere with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical implants to consult their physician and
the medical implant manufacturer before operating this machine.
WARNING:
The operation of any tool can result in foreign objects being thrown into your
eyes, which can result in eyes severely damaged. Before beginning power tool operation, always
wears safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shield.
IMPORTANT
READ CAREFULLY BEFORE USE.
KEEP FOR FUTURE REFERENCE.
1) Read the instructions carefully. Be familiar with the controls and the proper use of the equipment;
2) Never allow children or people unfamiliar with these instructions to use the lawnmower. Local
regulations can restrict the age of the operator
3) Never mow while people, especially children, or pets are nearby;
4) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other
people or their property.
5) While mowing, always wear substantial footwear and long trousers. Do not operate the equip-
ment when barefoot or wearing open sandals; Avoid wearing clothing that is loose fitting or that has
hanging cords or ties.
6) Thoroughly inspect the area where the equipment is to be used and remove all objects which can
be thrown by the machine.
7) Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
Replace damaged or unreadable labels.
8) Mow only in daylight or in good artificial light.
9) Avoid operating the equipment in wet grass, where feasible.
10) Always be sure of your footing on slopes.
11) Walk, never run.
12) For wheeled rotary machines; mow across the face of slopes, never up and down.
13) Exercise extreme caution when changing direction on slopes.
14) Do not mow excessively steep slopes.
15) Use extreme caution when reversing or pulling the lawnmower towards you.
16) Stop the blades if the lawn mower has to be tilted for transportation when crossing surfaces
other than grass, and when transporting the lawn mower to and from the area to be mowed.
17) Never operate the lawnmower with defective guards, or without safety devices, for example
deflectors and/or grass catchers, in place.
18) Start or switch on the motor carefully according to instructions and with feet well away from the
blades.
19) Do not tilt the lawnmower when starting switching on the motor, except if the lawnmower has to
be tilted for starting. In this case, do not tile it more than absolutely necessary and lift only the part
which is away from the operator.
20) Do not start the motor when standing in front of the discharge chute.
21) Do not put hands or feet near or under rotating parts, Keep clear of the discharge opening at all
times.
22) Never pick up or carry a lawnmower while the motor is running;
23) Stop the motor and switch off isolator key. Make sure that all moving parts have come to a
complete stop:
-whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the lawnmower;
- after striking a foreign abject. Inspect the lawnmower for damage and make repairs before
restarting and operating the lawnmower.
If lawnmower starts to vibrate abnormally (check immediately):
- inspect for damage;
- replace or repair any damage parts;
- check for and tighten any loose parts.
24) Stop the mower:
- whenever you leave the lawnmower.
25) Keep all nuts, blots and screws tight to be sure the equipment is in safe working condition.
26) Check the grass catcher frequently for wear or deterioration.
27) Replace worn or damaged parts for safety.
28) Children are not allowed to use the machine.
29) This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
30) Be careful during adjustment of the machine to prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
31) Always allow the machine to cool before storing.
32) After use and before storage, remove the battery from the machine and check for damage.
33) When servicing the blades be aware that, even though the power source is switched off, the
blades can still be moved.
34) Replace worn or damaged parts for safety; Use only genuine replacement parts and acces-
sories.
35
）
Be careful during adjustment of the appliance to prevent entrapment of the fingers between
moving blades and fixed parts of appliance.
36
）
Recharge only with the charger specified by the manufacture .Using a charge with an
incompatible battery pack may create a risk of fire.
37
）
Use power tools only with specifically designated battery packs .Use of any other battery packs
may create a risk of injury and fire.
38
）
When battery pack is not in use ,keep it away from other metal objects like ,paper clips ,coin,
keys, nails, screws ,or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
39
）
Under abusive conditions, liquid may be ejected from the battery:
-If contact accidentally occurs, flush with water.
-If liquid contacts eyes additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
1. When device is not in use, keep it away from other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
2. Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause skin irritation or burns.
Safety Advice for Rechargeable Battery and Charger
Use only the battery provided with the lawn mower and the provided charger.
Protect battery and battery charger from humidity.
Do not operate the battery charger outdoors.
When it is not in use or before cleaning and servicing, disconnect the battery charger from the
power supply.
Take special care of the battery.
Avoid dropping it onto any hard surface and do not subject it to pressure or any other form of
mechanical stress.
Keep the battery away from extreme heat and cold.
Do not open or attempt to repair the battery or the battery charger. If any parts are defective,
have them repaired by a qualified technician or send them to our service department for repair.
Only charge the battery at an ambient (surrounding air) temperature between 0ºC and +50ºC.
A charged battery can be used to power the machine under ambient temperature conditions
between -20ºC and +70ºC.
When not in use, store the battery in a dry place between 10ºC and 30ºC.
The battery should be recharged when it fails to produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE using product with its battery in a depleted condition.
The battery is not fully charged at the factory. Before attempting to use it, it must be fully charged
firstly.
IMPORTANT! DANGER!
Never short-circuit the battery or expose it to moisture. Do not store it together with any metal parts
which could short-circuit the contacts. The battery could overheat, start burning or exploded. If any
person comes into contact with acid or similar internal fluids or substances contained in the battery,
wash off these substances immediately with plenty of water. If these substances make contact with
the eyes, rinse with plenty of water and visit a doctor immediately.
WARNING! Do not open the battery pack to get the battery out by yourself.
Do not place the rechargeable battery into fire or water. It can explode. The Rechargeable battery
should not be discarded to domestic refuse, regardless of whether used or unused. You should
return it to a local battery collection point in accordance with battery regulations or return them to
us suitably marked “Used Battery”.
3. GENERAL IDENTIFICATION
4. TECHNICAL DATA
Model DLM4040Li
Rated voltage : 40 V d.c.
No load speed: 3300 rpm
Grass catcher capacity: 40L
Cutting width: 380 mm
Net weight: 15 kg
Height adjustment: 25-75 mm, 5 adjustment
Model DYM101301
Sound pressure level at the operator’s position: 72.1dB(A) K=3 dB(A)
Measured sound power level: 83.3dB(A) K=3.65dB(A)
Guaranteed sound power level: 92dB(A)
Vibration: Max.2.53m/s² K=1.5 m/s²
Battery Lithium-ion
Model number
DYMA81
DYMA72E
Rated voltage
40V d.c.
40V d.c.
Capacity
90Wh
144Wh
Number of battery 20pcs
20pcs
Battery charger
Model number
DYMA83
Input: 220-240VAC,50Hz,1A
Output : 40V d.c., 2A
Allowable charging temperature range: 0-50ºC
5. ASSEMBLY
5.1 Assemble the folding handle
1. Fix the lower handlebars into the unit body with the locking lever. (Fig.2A/ Fig.2B).
2. Release the upper handlebars for folding. Connect the upper handle and the lower handle with
locking levers, bolts and washers. (Fig.2C).
3. Push the locking lever closed to lock the handlebars in the operating position. (Fig.2D/ Fig.2E).
4. Attach the cable clamp to the position shown and then attach the cable. (Fig.2F).
5.2 Assemble the grass catcher
Insert one end of handle with a projection into the grass catcher, and then fix another end of the
handle onto the grass catcher with the screw. (Fig.3A/ Fig.3B/ Fig.3C).
1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig.3D/Fig.3E/Fig.3F).
2. To remove: Grasp and lift the rear cover, remove grass catcher.
There is a level indicator on the top of the grass catcher that shows whether the catcher is empty or
full:
- The level indicator inflates if the catcher is not full during the moving. (Fig. 3G).
- If the catcher is full, the indicator collapses; once this happens stop moving immediately and
empties the catcher, make sure it is clean and ensure its meshwork is ventilated. (Fig. 3H).
IMPORTANT:
If the position of indicator opening is very dirty, the indicator will not inflate-in this case, clean the
position of indicator opening immediately.
5.3 Assemble the battery
1. Make sure the On-off button is pulled out. (Fig. 4A).
2. Open the battery door. (Fig. 4B).
3. Insert the battery pack into battery holder.(Fig. 4C).
4. Make sure the latch on bottom of battery pack snaps in place and that battery pack is fully
seated.
5. Close the battery door. (Fig.4D).
5.4 Remove the battery
1. Lift and hold up the battery door (Fig. 5A).
2. Press and hold the battery latch button(1) at the bottom of the battery pack. (Fig. 5B).
3. Remove battery pack(2) from the product. (Fig. 5C).
5.5 Adjustment for an appropriate height
1.Pull the locking lever opening;
2.Rotating the upper handle centered of the angle adjusting gear for adjusted an appropriate angle
into the scope 0º to 16º as the Fig.6 shown;
3.Push the locking lever closed to connect the lower handle and the upper handle.
a) if the lawn mower strikes an object.
b) if the motor stops suddenly
c) if the blade is bent (do not align!)
d) if the motor shaft is bent (do not align!)
e) Use only manufacturer’s recommended replacement parts and accessories.
11. TROUBLESHOOTING
WARNING:
Before performing any maintenance or cleaning work, always remove battery and
pull out the On-off button! Only with a stopped motor and standstill cutter.
CAUTION!
Faults which can not be rectified with the aid of this table may be rectified by a
specialist company only (customer service centre).
12. ENVIRONMENTALLY FRIENDLY DISPOSAL
According to EU directive 2012/19/EU on electric and electronic equipment and its implementation
into national law, all electric tools must be separately collected and environmentally friendly recy-
cled. Alternative disposal: If the owner of the power tool does not return the tool to the manufactu-
rer, he is responsible for proper disposal at a designated collection point that prepares the device
for recycling according to national recycling laws and regulations.
This does not include accessories and tools without electric or electronic components.
