Care and maintenance
Do not dry clean.
Do not iron.
Do not machine wash or machine dry.
Before cleaning ensure the controller is set to 0 (OFF) position and remove
socket from the wall and the connector plug from the blanket.
The heating elements within the blanket are fully waterproof.
NOTE:
This blanket should never be used whilst folded as this will cause
overheating and the operation of the thermal safety device.
Spot cleaning
Sponge the affected area using a lukewarm neutral detergent or a mild
soap solution. Follow this by sponging using clean water. Remove any
excess water by compressing the wet area between absorbent towels.
Hand washing
Immerse the blanket only in a lukewarm neutral detergent or soap solution
(
DO NOT ALLOW THE CONTROLLER TO COME INTO CONTACT WITH
ANY LIQUIDS)
Soak for five minutes then remove from the solution and gently squeeze
the solution through the blanket, rinse in clean water and allow to dry
DO
NOT WRING.
Please read these operating instructions thoroughly and keep them in a
safe place for future reference.
Remove all packing materials and discard responsibly.
Technical Data
Voltage
:
220-240V ~ 50Hz
Rated power :
120W
Model
:
HEA1488
Class II
