DAELIM S4 four, Руководство пользователя

Страница: 44 / 68

42
●
Make sure to stop the engine prior to
car washing.
●
Be careful not to allow water to enter
the muffler during the washing.Water
inside the muffler may cause an
improper engine starting or rust
occurrence.
● Do not let water get inside the braking
system during the washing, as water
inside the brake system may weaken the
braking power. Upon completion of
washing, select a safe place where there
is no traffic obstruction, and start the
vehicle.
Lightly apply the brake while driving at
a slow speed and check the braking
power. If the braking power has been
weak-ened, apply brake lightly while
driving at a slow speed to dry up the
brake system.
●
Take precautions when waxing the
vehicle. Excessive polish of the painted
section and/or the resin part with
compound wax might damage the
painted section causing discoloration of
the affected area.
Extended storage, such as for winter,
requires that you take certain steps to
reduce the effects of deterioration from
non-use of the motorcycle.
In addition, necessary repairs should be
made BEFORE string the motorcycle;
otherwise, theses repairs may be forgotten
by the time the motorcycle is removed
from storage.
●
Empty the fuel tank into an approved
gasoline container using a
commercially available hand siphon or
an equivalent method.
●
If storage will last more than one
month, carburetor draining is very
important to assure proper performance
after storage.
CLEANING
STORAGE
CAUTION
●
Do not wash your motorcycle right
after use.When the motorcycle is still
hot, water drops will evaporate faster
and spot hot surfaces.
●
Do not use high pressure water jets.
Never aim the nozzle direct at wheel
bearings, front fork seals, electric
items, air inlets or exhaust pipe ends.
●
Clean off stubborn dirt or exceeding
grease from engine parts using a
degreasing agent.
Be sure to avoid contact with drive
parts (chain, sprockets, etc)
Rinse with warm water and dry all
surfaces with chamois leather.