69
English
Oven Maintenance
If you experience an issue with your range, review the tables in this section to resolve it. If you cannot find a
solution, call Dacor Customer Assurance (800-793-0093) for assistance.
Gas Safety
Problem
Possible cause
Action
You smell gas
Burner is ON, but burner is not lit.
Turn the burner knob to OFF.
Gas leak.
•
Evacuate the building.
•
From a neighbor's home (your phone may cause a spark that
ignites the gas), immediately call the gas supplier, and follow
their directions. (If you cannot reach your gas supplier, call
the fire department.)
Surface Burner
Problem
Possible causes
Action
No burners light
Cooktop is unplugged.
Ensure power cord is plugged into a live, grounded
outlet.
Blown fuse/tripped circuit breaker.
Replace fuse/reset circuit breaker.
Gas supply not on or improperly con-
nected.
See the Installation Instructions.
Burner does not light
Control knob not set properly.
Push in knob and turn to Lite position.
Burner caps not in place or burner base
misaligned.
•
Clean the electrodes.
•
Put burner cap on burner head.
•
Align burner base.
Burner clicks during operation
Control knob left in Lite position.
After burner ignites, turn knob to desired setting; if
burner still clicks, contact service technician.
Burner not burning evenly
Burner improperly assembled.
See Pg. 62.
Dirty burners.
Clean the burner components, see Pg. 60.
Very large or yellow burner flames
Wrong burner orifice installed.
Check orifice size; contact installer if you have wrong
orifice (LP gas, natural gas or vice versa).
Control Display
Problem
Possible cause
Solution
Display goes blank
Bad fuse/tripped circuit breaker.
Replace fuse/reset circuit breaker.
Control panel not responding
Moisture/residue on panel; Control Lock
enabled.
Remove moisture/residue, retry; disable Control
Lock.