Dacor EF36LNBSS, Инструкция по использованию и уходу

Страница: 8 / 20

6
Water Filter Monitor
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
The water filter monitor will help you know when it is time to
change your filter. To change the filter, see
Replacing the Water
Filter on page 13.
DISPLAY READING: STATUS:
99 percent New filter installed
10 percent Order replacement filter
0 percent or flow decreases Replace filter
A new water filter should display
a reading of 99%. The reading in
the display will decrease as the
filter life is used. When the display
reads 10%, it is time to order
a replacement water filter. It is
recommended that you replace the
filter when the filter display changes
to 0% OR when water flow to your
ice maker decreases noticeably. See
Replacing the Water Filter on page 13.
After replacing the water filter, press RESET and hold it for 2
seconds to change the water filter display to 99 percent.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads or temporarily warm room temperatures.
Press the MAX COOL key to turn on the Max Cool feature. The
MAX COOL indicator light will remain on for 24 hours unless
manually turned off.
NOTE : The refrigerator temperature display will remain at 34°F
(1°C) and the freezer temperature display will remain at -5°F
(-21°C) while the Max Cool feature is on. After 24 hours, the
refrigerator will automatically return to the previous temperature
settings.
Refrigerator Operation
Setting the Controls (continued)
Setting the Temperature Scale
The indicator light, next the the C° button, is lit when the
„
temperature scale for the freezer and refrigerator displays is
set to Celsius. To change the displays to Celsius (or back to
Fahrenheit), press the C° button.
Adjusting the Temperature Setting
NOTE : Wait at least 24 hours between adjustments. Re-check the
temperatures before other adjustments are made.
To adjust the temperature setting:
Press the refrigerator or freezer
„
UP (

) or DOWN (

) key
until the desired temperature is reached.
NOTE : The adjustable temperature range for the freezer is
-5°F to 6°F (-21°C to -14°C). The adjustable temperature
range for the refrigerator is 34°F to 46°F (1°C to 8°C).
Use the table below for guidance if you need to change the
temperature.
CONDITION/
REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
Not set correctly for conditions REFRIGERATOR Control 1°
higher
REFRIGERATOR too warm
High use or room very warm REFRIGERATOR Control 1° lower
FREEZER too cold
Not set correctly for conditions FREEZER Control 1° higher
FREEZER too warm/too little ice.
High use or heavy ice use FREEZER Control 1° lower
Celsius indicator light
Max cool
indicator light