English
77
Care and maintenance
4.
Open the door fully. If it does not lie
perpendicular to the oven, remove the
door, and repeat Steps 1 – 3.
5.
At each hinge of the oven door, flip the
hinge locks up into the locked position.
(See
Removing the oven doors
, Step 3,
graphic A, pg. 75.)
6.
Close the oven door.
There should be an even gap between
the door and control panel. If one side
has a wider gap, the hinge on that side
is improperly installed.
7. Reconnect the LED wire harness.
CAUTION
Push the
wiring
inward
as
it was
before you removed the door.
Dangling wiring
may
snag o
n the door or
become heat-
damaged.