background image

Copyright 

D-Link Systems, Inc. makes no warranty of any kind with regard to this material, including, 
but not limited to, the implied warranties of merchantability and fitness for a particular 
purpose. D-Link Systems, Inc. shall not be liable for errors contained herein or for incidental 
or consequential damages in connection with the furnishing, performance, or use of this 
material.  

This document contains proprietary information, which is protected by copyright. No part of 
this document may be photocopied, reproduced, or translated into another language without 
the prior written consent of D-Link Systems, Inc. 

The information is provided “as is” without warranty of any kind and is subject to change 
without notice. The only warranties for D-Link products and services are set forth in the 
express warranty statements accompanying such products and services. Nothing herein 
should be construed as constituting an additional warranty. D-Link shall not be liable for 
technical or editorial errors or omissions contained herein. 

Copyright © 2011 D-Link Systems, Inc. ™; All Tights Reserved 

Patents and Trademarks 

Includes one or more of the following United States patents: 6,941,396; 7,353,306; 
7,389,462; 7,460,473; 7,512,663 and 7,594,002.  Other patents are pending. 

D-Link and the D-Link logo are registered in U.S. Patent and Trademark Office.  All other 
product names mentioned herein may be trademarks or registered trademarks of their 
respective companies. 

Microsoft Windows is a U.S. registered trademark of Microsoft Corporation. 

All other brand or product names are or may be trademarks or service marks, and are used 
to identify products or services, of their respective owners. 

Important data protection information 

You should back up all data before installing any drive controller or storage peripheral. D-
Link is not responsible for any loss of data resulting from the use, disuse or misuse of this or 
any other D-Link product. 

Notice and Recommendations 

Although D-Link has attempted to ensure the accuracy of the content of this manual, it is 
possible that this document may contain technical inaccuracies, typographical, or other 
errors.  D-Link provides this publication “as is” without warranty of any kind, either express 
or implied, including, but not limited to implied warranties of merchantability or fitness for 
a particular purpose. 

D-Link assumes no liability for any error in this publication, and for damages, whether 
direct, indirect, incidental, consequential or otherwise, that may result from such error, 
including, but not limited to loss of data or profits.  The published information in the manual 
is subject to change without notice.  D-Link reserves the right to make changes in the 
product design, layout, and driver revisions without notification to its users. 

This version of this manual supersedes all previous versions. 

All manuals and user guides at all-guides.com

Содержание xStack Storage DSN-4100







































Отзывы: