manualshive.com logo in svg

D-Link xStack DWS-3200 Series, Руководство CLI

Поделиться
Скачать
D-Link xStack DWS-3200 Series Скачать руководство пользователя страница 284

DXS/DWS-3200 series CLI Reference Guide

Page 281 

snmp-server engineID local

The 

snmp-server engineID local

 Global Configuration mode command specifies the Simple Network 

Management Protocol (SNMP) engineID on the local device. To remove the configured engine ID, use the 

no

 form 

of this command.

Syntax

snmp-server engineID local

 {

engineid-string

 |

 default

}

no snmp-server engineID local

Parameters
•

engineid-string

—Specifies a character string that identifies the engine ID. (Range: 5-32 characters)

•

default

—The engine ID is created automatically based on the device MAC address.

Default Configuration

The engine ID is not configured.

If SNMPv3 is enabled using this command, and the default is specified, the default engine ID is defined per 
standard as:

•

First 4 octets — first bit = 1, the rest is IANA Enterprise number = 674.

•

Fifth octet — set to 3 to indicate the MAC address that follows.

•

Last 6 octets — MAC address of the device.

Command Mode

Global Configuration mode

User Guidelines

To use SNMPv3, you have to specify an engine ID for the device. You can specify your own ID or use a default 
string that is generated using the MAC address of the device.

If the SNMPv3 engine ID is deleted or the configuration file is erased, SNMPv3 cannot be used. By default, 
SNMPv1/v2 are enabled on the device. SNMPv3 is enabled only by defining the Local Engine ID. 

If you want to specify your own ID, you do not have to specify the entire 32-character engine ID if it contains 
trailing zeros. Specify only the portion of the engine ID up to the point where just zeros remain in the value. For 
example, to configure an engine ID of 123400000000000000000000, you can specify snmp-server engineID local 
1234. 

Since the engine ID should be unique within an administrative domain, the following is recommended:

For a standalone device, use the default keyword to configure the engine ID.

For a stackable system, configure the engine ID and verify its uniqueness.

Changing the value of the engine ID has the following important side-effect. A user's password (entered on the 
command line) is converted to an MD5 or SHA security digest. This digest is based on both the password and the 
local engine ID. The user’s command line password is then destroyed, as required by RFC 2274. As a result, the 
security digests of SNMPv3 users become invalid if the local value of the engine ID change, and the users will 
have to be reconfigured.

You cannot specify an engine ID that consists of all 0x0, all 0xF or 0x000000001.

Содержание xStack DWS-3200 Series






































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды