D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 65

Страница: 65 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

SNTP Settings

SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.

The

SNTP Settings

folder contains two windows:

Time Settings

and

Time Zone Settings

Time Settings

To configure the time settings for the Switch, open the

Configuration

folder, click

SNTP Settings

, and then click the

Time

Settings

link, revealing the following window for the user to configure.

Figure 6- 31. Time Settings window

The following parameters can be set or are displayed:

Parameter Description

Status

SNTP State

Use this radio button to enable or disable SNTP.

Current Time

Displays the Current Time.

Time Source

Displays the time source for the system.

SNTP Settings

SNTP First Server

The IP address of the primary server from which the SNTP information will be taken.

SNTP Secondary Server

The IP address of the secondary server from which the SNTP information will be taken.

SNTP Poll Interval In
Seconds (30-99999)

The interval, in seconds, between requests for updated SNTP information.

Set Current Time

Date (DD/MM/YYYY)

Enter the current day, month, and year to update the system clock.

Time (HH:MM:SS)

Enter the current time in hours, minutes, and seconds.

Click

Apply

to implement your changes.

Содержание xStack DGS-3200 Series
































































































































































































































































































Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы:

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 65 / 287

Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы: