manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 62 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 62

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

48 

     

Dual Configuration Settings 

The following window displays dual configuration settings on the Switch. The Switch allows two firmware images to be stored in 
its memory and either can be configured to be the boot-up firmware for the Switch. The user may select a boot-up firmware image 
for the Switch by clicking the 

Boot

 button to select it. This will instruct the Switch to use this newly selected firmware the next 

time the Switch is restarted. To delete a firmware image, click the 

Delete

 button. The 

Active

 button indicates active firmware. 

To access the following window, click 

Configuration

 

> Dual Configuration Settings

. 

 

Figure 6- 28. Dual Configuration Settings window 

The following parameters may be configured or viewed: 

Parameter                 Description 

ID 

States the image ID number of the firmware in the Switch’s memory. The Switch can store 2 
firmware images for use. Image ID 1 will be the default boot-up firmware for the Switch unless 
otherwise configured by the user. 

Version 

States the firmware version.  

Size 

States the size of the corresponding firmware, in bytes. 

Update Time 

States the specific time the firmware version was downloaded to the Switch.  

From 

States the IP address of the origin of the firmware. There are five ways firmware may be 
downloaded to the Switch. Boot-up files are denoted by an asterisk (*) next to the file. 
R – If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Console Serial Port (RS-232). 
T - If the IP address has this letter attached to it, it denotes a firmware upgrade through Telnet. 
S - If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Simple Network Management Protocol (SNMP). 
W - If the IP address has this letter attached to it, it denotes a firmware upgrade through the web-
based management interface. 
SSH - If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Secure Shell network protocol. 
SIM – If the IP address has this letter attached to it, it denotes a firmware upgrade through the 
Single IP Management feature. 

User 

States the user who downloaded the firmware. This field may read “Anonymous” or “Unknown” 
for users that are not identified. 

Boot 

An asterisk indicates which firmware is used for boot-up by the Switch.

 

 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов