manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 60 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 60

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

46 

     

CLI Paging Settings 

To configure CLI paging on the Switch, click

 Configuration > CLI Paging Settings

: 

 

Figure 6- 26. CLI Paging Settings window 

The following parameter may be configured or viewed: 

Parameter                Description 

CLI Paging 
Status 

Command Line Interface paging stops each page at the end of the console. This allows you to 
stop the scrolling of multiple page of text beyond the limits of the console. CLI Paging is Enabled

 

by default. To disable it, click the Disabled radio button. 

Click 

Apply

 to set the CLI Paging setting. 

 

Firmware Information 

This window allows the user to view, set the next boot-up status, and delete current firmware images stored on the Switch. To set 
firmware as the boot-up firmware the next time the Switch is restarted, click the 

Set Boot

 button. To remove the firmware from 

this window, click the 

Delete

 button.  

To access the following window, click 

Configuration

 

> Firmware Information

. 

 

Figure 6- 27. Firmware Information window 

The following parameters may be configured or viewed: 

Parameter                 Description 

ID 

States the image ID number of the firmware in the Switch’s memory. The Switch can store 2 
firmware images for use. Image ID 1 will be the default boot-up firmware for the Switch unless 
otherwise configured by the user. 

Version 

States the firmware version.  

Size 

States the size of the corresponding firmware, in bytes. 

Update Time 

States the specific time the firmware version was downloaded to the Switch.  

From 

States the IP address of the origin of the firmware. There are five ways firmware may be 
downloaded to the Switch. Boot-up files are denoted by an asterisk (*) next to the file. 
R – If the IP address has this letter attached to it, it denotes a firmware upgrade through the 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов