manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 57 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 57

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

43 

     

DHCP/BOOTP Relay Interface Settings 

This window allows the user to set up a server, by IP address, for relaying DHCP/BOOTP information to the Switch. The user 
may enter a previously configured IP interface on the Switch that will be connected directly to the DHCP/BOOTP server using 
this window. Properly configured settings will be displayed in the DHCP/BOOTP Relay Interface Table

 

at the bottom of the 

window, once the user clicks the

 Apply 

button. The user may add up to four server IPs per IP interface on the Switch. Entries may 

be deleted by clicking the corresponding 

Delete

 button.  

To enable and configure DHCP/BOOTP Relay Global Settings on the Switch, click

 Configuration > DHCP/BOOTP Relay 

> 

DHCP/BOOTP Relay Interface Settings

: 

 

Figure 6- 20. DHCP/BOOTP Relay Interface Settings window 

The following parameters may be configured or viewed: 

Parameter            Description 

Interface 

The IP interface on the Switch that will be connected directly to the Server. 

Server IP 

Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be configured per IP 
Interface. 

Click 

Apply

 to include this Server IP.  

 

DHCP Auto Configuration Settings 

This window is used to enable the DHCP auto configuration feature on the Switch. When enabled, the Switch is instructed to 
receive a configuration file from a TFTP server, which will set the Switch to become a DHCP client automatically on boot-up. To 
employ this method, the DHCP server must be set up to deliver the TFTP server IP address and configuration file name 
information in the DHCP reply packet. The TFTP server must be up and running and hold the necessary configuration file stored 
in its base directory when the request is received from the Switch. For more information about loading a configuration file for use 
by a client, see the DHCP server and/or TFTP server software instructions. The user may also consult the 

Upload Log File

 

window description located in the 

Tools

 section of this manual. 

If the Switch is unable to complete the DHCP auto configuration, the previously saved configuration file present in the Switch’s 
memory will be used. 

To enable and configure DHCP auto configuration settings on the Switch, click

 Configuration > DHCP Auto Configuration 

Settings

: 

 

Figure 6- 21. DHCP Auto Configuration Settings window 

To enable the DHCP Auto Configuration State, use the pull-down menu to choose 

Enabled

 and click the 

Apply

 button. 

 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов