D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 52

Страница: 52 / 287

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

System Log Configuration

The

System Log Configuration

folder contains two windows:

System Log Settings

and

System Log Host

System Log Settings

The

System Log Settings

window may be used to choose a method for which to save the switch log to the flash memory of the

Switch. To view this window, open the

Configuration

folder and then click

System Log Configuration > System Log Settings

Figure 6- 15. System Log Settings window

Use the pull-down menu to choose the method for saving the switch log to the flash memory. The user has three options:

•

Time Interval

– Users who choose this method can configure a time interval by which the Switch will save the log files,

in the box adjacent to this configuration field. The user may set a time between

and

65535

minutes.

•

On Demand

– Users who choose this method will only save log files when they manually tell the Switch to do so, either

using the

Save

Log

link in the

Save

folder or clicking the

Save Log Now

button

on this window.

•

Log Trigger

– Users who choose this method will have log files saved to the Switch every time a log event occurs on the

Switch.

The default setting is

On Demand

. Click

Apply

to save changes made. Click

Save Log Now

to immediately save log files

currently on the switch.

System Log Host

Click

Configuration

System Log Configuration > System Log Host

to display the following window:

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the

Configuration

folder,

click

System Log Configuration > System Log Host

, to view the window displayed below.

Figure 6- 16. System Log Settings window

The following parameters may be configured or viewed:

Parameter

Description

Host ID

Syslog server settings index (

Host IP Address

The IPv4 address of the Syslog server.

UDP Port (514 or
6000-65535)

Type the UDP port number used for sending Syslog messages. The default is

514

Severity

This drop-down menu allows you to select the level of messages that will be sent. The
options are

Warning

Informational

, and

All

Содержание xStack DGS-3200 Series
































































































































































































































































































Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы:

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 52 / 287

Результаты поиска

Содержание xStack DGS-3200 Series

Отзывы: