manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 44 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 44

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

30 

     

IP Address 

The IP address may initially be set using the console interface prior to connecting to it through the Ethernet. If the Switch IP 
address has not yet been changed, read the introduction of the 

DGS-3200-10 CLI Manual

 

or return to Section 4 of this manual for 

more information. 

To configure the Switch's IP address: 

Open the 

Configuration

 folder and click 

IP Address

. The web manager will display the Switch's current IP settings in this 

window, as displayed below. 

 

Figure 6- 4. IP Address window 

To manually assign the Switch's IP address, subnet mask, and default gateway address: 

1.  Click the Manual radio button at the top of the window. 

2.  Enter the appropriate IP Address and Subnet Mask. 

3.  If accessing the Switch from a different subnet from the one it is installed on, enter the IP address of the default Gateway. 

If managing the Switch from the subnet on which it is installed, the user may leave the default address (0.0.0.0) in this 
field. 

4.  If the Switch has no previously configured VLANs, the user can use the Management VLAN Name entitled “default”. 

This default Management VLAN contains all of the Switch ports as members. If the Switch has previously configured 
VLANs, the user will need to enter the VLAN ID of the VLAN that contains the port connected to the management 
station that will access the Switch. The Switch will allow management access from stations with the same VID listed 
here. 

 

NOTE:

 The Switch's factory default IP address is 10.90.90.90 with a 

subnet mask of 255.0.0.0 and a default gateway of 0.0.0.0. 

To use the DHCP or BOOTP protocols to assign the Switch an IP address, subnet mask, and default gateway address: 

Use the radio button at the top of the window to choose either DHCP or BOOTP. This selects the method the Switch assigns an IP 
address on the next reboot. 

The following parameters may be configured or viewed:

 

Parameter              Description

 

Manual 

Allows the entry of an IP address, subnet mask, and a default gateway for the Switch. These fields 
should be of the form xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal form) 
between 

0

 and 

255

. This address should be a unique address on the network assigned for use by 

the network administrator.  

DHCP 

The Switch will send out a DHCP broadcast request when it is powered up. The DHCP protocol 
allows IP addresses, network masks, and default gateways to be assigned by a DHCP server. If 
this option is set, the Switch will first look for a DHCP server to provide it with this information 
before using the default or previously entered settings. 

BOOTP 

The Switch will send out a BOOTP broadcast request when it is powered up. The BOOTP protocol 
allows IP addresses, network masks, and default gateways to be assigned by a central BOOTP 
server. If this option is set, the Switch will first look for a BOOTP server to provide it with this 
information before using the default or previously entered settings. 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов