manualshive.com logo in svg

D-Link xStack DGS-3200 Series, Руководство пользователя, Страница: 42 / 287

Поделиться
Скачать
D-Link xStack DGS-3200 Series Скачать руководство пользователя страница 42

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

28 

     

 

Figure 6- 1. Device Information window 

System Information 

This window allows a user to enter a System Name, System Location, and System Contact

 

to aid in defining the Switch. 

To enter system information for the Switch: 

Open the 

Configuration

 folder and click 

System Information

. 

 

Figure 6- 2. System Information window 

The fields that can be configured are described below: 

Parameter                     Description 

System Name 

Enter a system name for the Switch, if so desired. This name will identify it in the Switch 
network. 

System Location 

Enter the location of the Switch, if so desired. 

System Contact 

Enter a contact name for the Switch, if so desired. 

Login Timeout 

Select the logout time used for the console interface. This automatically logs the user out after 
an idle period of time, as defined. Choose from the following options:

 2 Minutes, 5 Minutes, 10 

Minutes, 15 Minutes

 or 

Never

. The default setting is 

10 Minutes

. 

 Click

 Apply

 to implement changes made. 

 

Содержание xStack DGS-3200 Series
































































































































































































































































































Отзывы:

Нет отзывов