D-Link xStack DGS-3200 Series, Руководство CLI

Страница: 144 / 443

DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
144
Format
show stp ports {<portlist>}
Description
This command displays each port's parameter settings. If the portlist is not input, all ports will be shown. If
there are multi instances on this bridge, the parameters of the port on different instances will be shown.
Parameters
Parameters Description
ports
Shows parameters of the designated port numbers which are
distinguished from the parameters of the bridge.
portlist
One of the CLI Value Types, restricts the input value and format
of the ports.
Restrictions
None.
Examples
To show STP ports:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s t p p o r t s
C o m m a n d : s h o w s t p p o r t s
M S T P P o r t I n f o r m a t i o n
P o r t I n d e x : 1 , H e l l o T i m e : 2 / 2 , P o r t S T P : e n a b l e d
E x t e r n a l P a t h C o s t : A u t o / 2 0 0 0 0 0 , E d g e P o r t : N o / N o , P 2 P : F a l s e / N o
P o r t R e s t r i c t e d R o l e : F a l s e , P o r t R e s t r i c t e d T C N : F a l s e
P o r t F o r w a r d B P D U : E n a b l e d
M s t i D e s i g n a t e d B r i d g e I n t e r n a l P a t h C o s t P r i o S t a t u s R o l e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0 N / A 2 0 0 0 0 0 1 2 8 D i s a b l e d D i s a b l e d
2 N / A 2 0 0 0 0 0 1 2 8 D i s a b l e d D i s a b l e d
D G S - 3 2 0 0 - 1 0 : 4 #
16-4 show stp mst_config_id
Purpose
Used to show the MST Configuration Identification as defined in 802.1’s 13.7.