D-Link xStack DES-3810 Скачать руководство пользователя страница 176

Страница: 176 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

163

NLB FDB Settings

The Switch supports Network Load Balancing (NLB). This is a MAC forwarding control for supporting the Microsoft

server load balancing application where multiple servers can share the same IP address and MAC address. The

requests from clients will be forwarded to all servers, but will only be processed by one of them. In multicast mode, the

client uses a multicast MAC address as the destination MAC to reach the server. Regardless of the mode, the

destination MAC is the shared MAC. The server uses its own MAC address (rather than the shared MAC) as the

source MAC address of the reply packet. The NLB multicast FDB entry will be mutually exclusive with the L2 multicast

entry.

To view the following window, click

L2 Features > NLD FDB Settings

, as shown below:

Figure 5-125 NLB FDB Settings window

The fields that can be configured are described below:

Parameter

Description

VLAN Name

Click the radio button and enter the VLAN name of the NLB multicast FDB entry to be

created.

VID

Click the radio button and enter the VLAN by the VLAN ID.

MAC Address

Enter the MAC address of the NLB multicast FDB entry to be created.

Ports

Choose the forwarding ports for the specified NLB multicast FDB entry.

None

– The port is not the forwarding port. Click the

All

button to select all the ports.

Egress

- The port is the forwarding port. Click the

All

button to select all the ports.

Click the

Clear All

button to clear out all the information entered.

Click the

Apply

button to accept the changes made.

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

Похожие инструкции для xStack DES-3810

Бренды по названию

Популярные бренды

D-Link xStack DES-3810, Справочное руководство

Результаты поиска

Содержание xStack DES-3810

Отзывы:

Похожие инструкции для xStack DES-3810

Бренды по названию

Популярные бренды